Mpps V16 Windows 10

Right click the MPPS folder that was extracted, Cut and Paste it into the Local Disk (C:) 3. Open the MPPS folder on Local Disk (C:), then send MPPS setup driver to desktop (Create Shortcut) 4. Plug the USB cable into your MPPS V16 Interface and the other side into your Computer. The computer will detect the USB device and attempt to install. V16.1.02 MPPS is the newest and most powerful MPPS series ECU tool. It has more car list and ecu model than V12, 2. Support the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more.

One of the members in toyota-4runner.org/ forum highly recommends MPPS V16. He put in this way: “It’s really the newest professional ecu chip tuning tool, completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.”

Step 1: Insert MPPS V16 CD into the computer, and open it. Step 2: Install MPPS update 1) Pen MppsUpdate V16 2) Choose Language among these Languages: English, Ukranian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, Italian, Polish, Portuguese, Romanian and more 3) Click “Next” and accept the terms of the license agreement.
Top 6 Reasons to Get Mpps V16.1.02: 1. The MPPS V16 modern interface that allows you to read and write memory from the on-board computer through the diagnostic connector. Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more.

Since MPPS V16 are so widely respect, Diyobd2.fr here offers MPP V16 ECU programmer software, free download resources.

Free Download MPPS V16 software

Detail vehicle list download

Operating system:

Windows XP SP2/SP3 O/S with any anti-virus software or firewall program OFF

Function of MPPS V16 francais:

Read and write flash
EDC15 EDC16 EDC17 CHECKSUM

How to install MPPS V16 software:

1) Plug the MPPS V16 cable into the vehicle OBD port which located under the driver side. Then connect the MPPS interface with the computer/laptop.

2) Insert the CD software into the computer/laptop and open the CD

3) Install and run update file

4) Select language and click “Next”

5) Accept license agreement. MPPS is installing, click Next.

6) Copy “loader” in the CD and paste it to the desktop

7) Delete “MPPS” shortcut on the desktop

8) Open “Found New Hardware Wizard” window. Follow the instructions. Finish installation of software for “Amt Flash”

Click “Finish” to continue.

9) Click “My Computer” – “Manage” – “Device Manager” – “Universal Serial Bus controllers”. If you see “Amt Flash”, it means the driver is successfully installed.

10) Open the MPPS application software.

Open “loader”.

Choose from Local Disk (C)

Open “MPPS” folder,

Choose MPPS.

Select Language, car Make, car Model and ECU type.

Click “EDC ID (F1)”.

Click “Read”.

Click “Write”.

Here is a tutorial video guide for you to refer:

Ceci est du support technique du site WebAppareil Diagnostic Auto:Free Download MPPS V16 ECU programmer Software

Product Description

Free Ship from UK, No Tax.
MPPS V18 module adds support for advanced functions on Marelli ECU’s.
MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many other..
Warranty: 1 year

MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable

This module can support advanced functions on Marelli ECU’s. MPPS ECU flasher covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15 / 16 / 17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…

MultiBoot
This module supports advanced functions on Marelli ECUs.
Read and write of Micro, Flash and EEprom without using a BDM programmer.
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.

Tricore Boot
This module adds boot mode support for controllers with the tricore processor.

Auto detects ECU and processor type, no need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible)
Patch function for OBD Flashing of TPROT ECUs (supports only VAG at the moment)
TPROT/DS check feature: testing if TPROT actived without opening ECU.
Supports Bosch upto TP12
Supports Siemens (for ECUs without password protection)
Support unlocking of VAG Simos PCR and Simos 8.
Checksum Correction for Bosch MEDC17.

MPPS V18 ECU Flasher Additional Features:

Excellent recovery functions. In some cases MPPS can recover ECUs which others tools can not even make communications with.
On certain controllers it even works when with no program is present (a blank memory).

Selectable full / partial reading and writing when the ECU allows this function.

Writing “changes only” function for faster programming (when supported by the ECU).

Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.

Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.

Boot mode support for ECU’s with C167 and ST10 processors.

EEprom read/write functions for some ECU’s are included.

VAG MEDC17 TPROT level checking without opening the ECU.

Package includes:

1pc x MPPS V18
1pc x Breakout Tricore cable
1pc x CD Software
MPPS V18 Clone Supports Multi-languages

English, Afrikaans, Albanees, Bahasa Melayu, Danish, German, Estonian, Spanish, Filipino, Finish, Latvian, Lithuanian, Hungarian, Maltese , Dutch, Norsk, Polish, Portuguese, Roman, Slovenski, Slovencina

MPPS V18 firmware main board PCB with NXP chip display:
MPPS V18 China Clone Customer Review/Feedback:
MPPS V18 clone & Opel
Opel – EDC16C9/39, PSG16 via CAN OBD read and write ok
Opel Corsa marelli 1.3cdti OK (Be sure to run as administrator using windows 7)
Read and write Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO) via OBD (CAN) OK

MJD 6JF Fiat/Opel micro+ eeprom R/W OBD – K line (MPC555+95320) OK
Opel Signum PSG16 2.2CDTI read as a Zafira by OBD all OK
Opel Astra 2.0 16V CDTI BOSCH PSG16It auto checksum and read/write OK
Opel 602/3 full read/write Micro, Flash, EEPROM, via k-line & CAN ok
Opel 603 full R/W Micro, Flash, EEPROM, via k-line & CAN ok
Opel 6JO full read/write Micro & EEPROM, OK via k-line (CAN)
Clone MPPS V18 & PSA
Tested with PSA MEV17.4 TC1766 Read/Write via Boot Mode okay, used pinouts from Fgtech galletto documentation.
Read and write EDC16 Peugeot Partner 1.6hdi OK (Be sure to run as administrator using windows 7)
PSA 207 EDC16C34 Can R/W ok and Ducato EDC16C39 R/W ok
Mpps V18 china & others
Read and write Land Rover TD5, tricore read and write EDC17C10 and unlock Siemens PCR2.1ECU successfully
Ford – SID206 read and write OK
Tested BMW EDC16C31, read/write OK from windows 8 64bit
Tested EDC15P boot mode (recovery) and k-line read and write, 100% no problems
Med17.x.x works no problem. It’s working perfectly. All modules are open including tricore.
Read a Bosch ME7.9.10 from Fiat Punto T-JET 1.4 turbo via OBD with multiboot function … This tool is the only one that can read this ECU from OBD
Test mpps clone with PSG16 read/write flash, Works fine. Real direct to the pump,write for obd
MPPS V18 ECU Chip Tuning Cable FAQs:
Q:What is the meaning of ”TRICORE + MULTIBOOT” for MPPS ?
A:That means a way to dissemble the ecu, weld the boot chip point, and use ecu adapter definition to read ECU data.
MPPS supports Tricore, MultiBoot, OBD.
Q: What is the meaning of ”breakout” among MPPS Breakout Tricore Cable?
A:It is the connector adapter.
Q: Can Mpps support C167 and ST10?
A: Yes, Boot mode support for ECU’s with C167 and ST10 processors.
Q: MPPS can auto detect K-Line?
A: Yes, it support auto detection of K-Line/CAN.
Q: What about MEDC17 TPROT level checking through mpps?

Mpps V16 Software Windows 10

A: VAG MEDC17 TPROT level checking without opening the ECU.
Q: Any option to bypass?
A: MPPS has option to bypass and force preferred means of communication; temporary bypass of immobiliser on ME7 system.
Q: MPPS for eeprom r/w?
A: Yes, EEprom read/write functions for some ECU.
Q: Can Mpps support immo off without welding the boot chip?
A: MPPS doesn’t support immo off. And Mpps conenct to the vehicle with obd2 port, no need welding.
Q: Can Mpps read PSG16?
A: Check MPPS V18_Carlist
Q:Can MPPS be connected with internet?
A:You’d better not.
Q:Kess v2 vs MPPS v16 which is better?
A:Kess v2 is better, more features and possibilities. but mpps v16 is working very stable for a kess do PCR 2.1
We are here for you:
Whatsapp for Sale: +86 18259252285

Mpps V16 For Windows 10

Whatsapp for Tech Support: +86 18150118226

Mpps V16 Windows 10 Crack

Email:Sales@OBDII365.com
Skype:OBDII365.com